This product is regulated by the following standards:

Technical data

DIN 2510-1

Standard DIN 2510-1

The Part 1 of the norm Din 2510 describes application and installation examples, studies on the measurement of the screw connections. Bolted connections with reduced shank according to this standard are preferably used where the conservation of the bias and the durability of screw connections are to be largely ensured under varying of the mechanical and thermal loads.

DIN 2510 Table 1. Assembling examples: bolts with hex. nuts - Einbauspiele: Schraubenbolzen mit Sechskantmuttern - Esempi d''assemblaggio: bullone con dado
Publication date:09/1974
Image	bolts	expansion sleeves	hex. nuts	Notes
	L	-	NF	centering through bolts, l1=clamping length+2c1, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Schraubenbolzen, l1=Klemmlänge+2c1, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite bulloni , l1 = lunghezza di assemblaggio+ 2 c1 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	L	E	NF	centering through bolts and exp. sleeves, l1=clamping length+2c1, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Schraubenbolzen und Dehnhülsen, l1=Klemmlänge+2c1, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite bulloni e boccole, l1 = lunghezza di assemblaggio+ 2 c1 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	K	-	NF	centering through nuts, l1=clamping length+2c1, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Sechskantmuttern, l1=Klemmlänge+2c1, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite bulloni , l1 = lunghezza di assemblaggio+ 2 c1 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	K	D	TF	centering through nuts and exp. sleeves, l1=clamping length+2c2, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Sechskantmuttern und Dehnhülsen, l1=Klemmlänge+2c2, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite dadi e boccole , l1 = lunghezza di assemblaggio+ 2 c2 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	Z -	-	NF	centering through bolts, l1=clamping length+2c3, grading of the screw length l1 from 5 mm to 5 mm; Zentrierung durch Schraubenbolzen, l1=Klemmlänge+2c3, Stufung der Schraubenlänge l1 von 5mm zu 5mm; centratura tramite bulloni , l1 = lunghezza di assemblaggio+ 2 c3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm.
	Z	E	NF	centering though bolts and exp. sleeves exp. sleeves, l1=clamping length+2c3, grading of the screw length l1 from 5 mm to 5 mm; Zentrierung durch Schraubenbolzen und Dehnhülsen, l1=Klemmlänge+2c3, Stufung der Schraubenlänge l1 von 5mm zu 5mm. centratura tramite bulloni e boccole , l1 = lunghezza di assemblaggio+ 2 c3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;

DIN 2510 Table 2
thread size d1	c1	c2	c3 min	d2	d3	d4	example l1/d1 1&3	example l1/d1 3&4	example l1/d1 5&6	t1
M 12	14	12	16	23	23	23	0.88	0.84	0.92	1.5
M 16	18	16	20	28	28	28	0.9	0.87	0.93	1.5
M 20	22.5	20.5	24	33	33	33	0.92	0.89	0.93	1.5
M 24	27	24	29	37	37	37	0.91	0.88	0.93	2
M 27	30	27	32	43	43	43	0.92	0.89	0.94	2
M 30	33.5	30.5	36	48	47	48	0.93	0.9	0.94	2
M 33	36.5	33.5	39	53	52	53	0.9	0.91	0.94	2
M 36	40	37	43	57	56	57	0.94	0.91	0.94	2
M 39	43	40	46	63	61	63	0.94	0.92	0.94	2
M 42	46.5	43.5	49	69	66	69	0.94	0.92	0.94	2
M 45	49.5	46.5	52	73	71	73	0.95	0.92	0.95	2
M 48	53	49	56	78	76	78	0.95	0.92	0.95	3
M 52	5	53	60	84	81	84	0.95	0.93	0.95	3
M 56	61.5	57.5	64	92	86	92	0.95	0.93	0.95	3
M 64	70	66	73	100	96	100	0.95	0.94	0.95	3
M 72 X 6	78	74	81	112	107	112	0.95	0.94	0.95	3
M 80 X 6	86	82	89	120	117	122	0.96	0.95	0.96	3
M 90 X 6	96	92	99	134	132	136	0.96	0.95	0.96	3
M 100 X 6	106	101	109	150	148	153	0.9	0.96	0.97	4
M 110 x 6	116	111	119	160	162	167	0.97	0.96	0.97	4
M 120 x 6	126	121	129	175	178	183	0.97	0.96	0.97	4

DIN 2510 Table 3. Assembling examples: bolts with cap nuts - Einbauspiele: Schraubenbolzen mit Kapselmuttern - Esempi 0.97d''assemblaggio: bulloni con tappi di cope153rtura
Image163	bolts	expansion sleeves	hex. nuts	Notes
173	KU	-	AF	centering through cap nuts, l1=clamping length+c4+c5, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Kapselmuttern, l1=Klemmlänge+c4+c5, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite dadi di copertura , l1 = lunghezza di assemblaggio+ c4+c5 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
183	KU	D	BF	centering through cap nuts and exp. sleeves, l1=clamping length+c6+c7, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Kapselmuttern und Dehnhülsen, l1=Klemmlänge+c6+c7, Stufung der Schraubenlänge l1 von 1mm zu 1mm centratura tramite dadie boccole, l1 = lunghezza di assemblaggio+ c6+c7 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	ZU	-	AF	centering through bolts, l1=clamping length+c4+c8, grading of the screw length l1 from 5 mm to 5 mm; Zentrierung durch Schraubenbolzen, l1=Klemmlänge+c4+c8, Stufung der Schraubenlänge l1 von 5mm zu 5mm; centratura tramite bulloni , l1 = lunghezza di assemblaggio+ c4+c8 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;
	ZU	E	AF	centering through bolts and exp. sleeves, l1=clamping length+c4+c8, grading of the screw length l1 from 5 mm to 5 mm Zentrierung durch Schraubenbolzen und Dehnhülsen, l1=Klemmlänge+c4+c8, Stufung der Schraubenlänge l1 von 5 mm zu 5 mm; centratura tramite bulloni e boccole , l1 = lunghezza di assemblaggio+ c4+c8 , gradazione delle lunghezze vite da 5 mm a 5 mm;

DIN 2510 Table 4
thread size d1	c4	c5	c6	c7	c8 min	d3	d4	example l1/d1 1&2	example l1/d1 3&4	t1
M 12	30	18	28	16	17	23	23	0.96	0.9	1.5
M 16	35	21	33	19	21	28	28	0.87	0.9	1.5
M 20	41	25	39	23	25	33	33	0.88	0.9	1.5
M 24	46	29	44	27	30	37	37	0.85	0.9	2
M 27	51	32	49	30	33	43	43	0.86	0.9	2
M 30	56	36	54	34	36	47	48	0.9	0.9	2
M 33	61	39	59	37	39	52	53	0.9	0.9	2
M 36	65	42	63	40	43	56	57	0.9	0.9	2
M 39	67	45	65	43	45	61	63	0.9	0.9	2
M 42	72	48	70	46	49	66	69	0.91	0.9	2
M 45	75	51	73	49	51	71	73	0.9	0.9	2
M 48	82	56	80	54	55	76	78	0.91	0.9	3
M 52	86	59	84	57	59	81	84	0.92	0.9	3
M 56	91	64	89	62	63	86	92	0.91	0.9	3
M 64	100	72	98	70	71	96	100	0.93	0.9	3
M 72 X 6	108	80	106	78	78	107	112	0.93	0.9	3
M 80 X 6	115	87	113	85	85	117	122	0.93	0.9	3
M 90 X 6	124	97	122	95	94	132	136	0.93	0.9	3
M 100 X 6	133	106	131	104	103	148	153	0.92	0.9	4
M 110 x 6	142	115	140	113	112	162	167	0.93	0.9	4
M 120 x 6	153	124	151	122	121	178	183	0.93	0.9	4

DIN 2510 Table 5. Assembling examples: studs with hex. nuts - Einbauspiele: Stiftschrauben mit Sechskantmuttern - Esempi d''assemblaggio: tiranti con dadi esagonali
Image	studs	expansion sleeves	hex. nuts	Notes
	GQ,HQ,GS or HS	-	NF	l1=clamping length +c1+t2 or +c1+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c1+t2 oder +c1+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c1+t2 o +c1+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	GQ,HQ,GS or HS	D	TF	l1=clamping length +c2+t2 or +c2+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c2+t2 oder +c2+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c2+t2 o +c2+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	GP,HP,GR or HR	-	NF	l1=clamping length +c9+t2 or +c9+t3 , grading of the screw length l1 from 5 mm to 5 mm; l1=Klemmlänge+c9+t2 oder +c9+t3, Stufung der Schraubenlänge l1 von 5 mm zu 5 mm; l1 = lunghezza di assemblaggio +c9+t2 o +c9+t3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;
	GP,HP,GR or HR	E	NF	l1=clamping length +c9+t2 or +c9+t3 , grading of the screw length l1 from 5 mm to 5 mm l1=Klemmlänge+c9+t2 oder +c9+t3, Stufung der Schraubenlänge l1 von 5 mm zu 5 mm; l1 = lunghezza di assemblaggio +c9+t2 o +c9+t3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;

DIN 2510 Table 6
thread size	c1	c2	c9 min	d2	d3	d4	t1	t2	t3	example l1/d1 1&2	example l1/d1 3&4
M 12	14	12	15	23	23	23	1.5	21	23	0.84	0.92
M 16	18	16	19	28	28	28	1.5	25.5	28	0.87	0.93
M 20	22.5	20.5	24	33	33	33	1.5	32.5	35	0.89	0.93
M 24	27	24	29	37	37	37	2	38.5	41	0.88	0.93
M 27	30	27	32	43	43	43	2	41	44	0.89	0.94
M 30	33.5	30.5	35	48	47	48	2	46.5	50	0.9	0.94
M 33	36.5	33.5	39	53	52	53	2	49	53	0.91	0.94
M 36	40	37	42	57	56	57	2	54	59	0.91	0.94
M 39	43	40	45	63	61	63	2	57	61	0.92	0.94
M 42	46.5	43.5	49	69	66	69	2	62.5	67	0.92	0.94
M 45	49.5	46.5	52	73	71	73	2	65	70	0.92	0.94
M 48	53	49	55	78	76	78	3	70	76	0.92	0.95
M 52	5	53	59	84	81	84	3	74	80	0.93	0.95
M 56	61.5	57.5	64	92	86	92	3	80	86	0.93	0.95
M 64	70	66	73	100	96	100	3	90	93	0.94	0.95
M 72 X 6	78	74	81	112	107	112	3	97	100	0.94	0.95
M 80 X 6	86	82	89	120	117	122	3	104	108	0.95	0.96
M 90 X 6	96	92	99	134	132	136	3	113	117	0.95	0.96
M 100 X 6	106	101	109	150	148	153	4	122	127	0.96	0.97
M 110 x 6	116	111	119	160	162	167	4	131	136	0.96	0.97
M 120 x 6	126	121	129	175	178	183	4	140	145	0.96	0.97

DIN 2510 Table 7. Assembling examples: bolts with cap nuts - Einbauspiele: Schraubenbolzen mit Kapselmuttern - Esempi d''assemblaggio: bulloni con tappi di copertura
Image	bolts	expansion sleeves	hex. nuts	Notes
	GQ,HQ,GS or HS	-	AF	l1=clamping length +c5+t2 or +c5+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c5+t2 oder +c5+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c5+t2 o +c5+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	GQ,HQ,GS or HS	D	BF	l1=clamping length +c7+t2 or +c7+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c7+t2 oder +c7+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c7+t2 o +c7+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	GP,HP,GR or HR	-	AF	l1=clamping length +c10+t2 or +c10+t3 , grading of the screw length l1 from 5 mm to 5 mm; l1=Klemmlänge+c10+t2 oder +c10+t3, Stufung der Schraubenlänge l1 von 5 mm zu 5 mm; l1 = lunghezza di assemblaggio +c10+t2 o +c10+t3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;
	GP,HP,GR or HR	E	AF	l1=clamping length +c10+t2 or +c10+t3 , grading of the screw length l1 from 5 mm to 5 mm; l1=Klemmlänge+c10+t2 oder +c10+t3, Stufung der Schraubenlänge l1 von 5 mm zu 5 mm; l1 = lunghezza di assemblaggio +c10+t2 o +c10+t3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;

DIN 2510 Table 8
thread size	c5	c7	c10 min	d3	d4	t1	t2	t3	example l1/d1 3&4	example l1/d1 5&6
M 12	18	16	14	23	23	1.5	21	23	0.96	0.9
M 16	21	1	18	28	28	1.5	25.5	28	0.87	0.9
M 20	25	23	22	33	33	1.5	25.5	35	0.88	0.9
M 24	29	27	27	37	37	2	38.5	41	0.85	0.9
M 27	32	30	30	43	43	2	41	44	0.96	0.9
M 30	36	34	33	47	48	2	46.5	50	0.9	0.9
M 33	39	37	36	52	53	2	49	53	0.9	0.9
M 36	42	40	39	56	57	2	54.5	59	0.9	0.9
M 39	45	43	42	61	63	2	57	61	0.9	0.9
M 42	48	46	45	66	69	2	62.5	67	0.91	0.9
M 45	51	49	48	71	73	2	65	70	0.9	0.9
M 48	56	54	51	76	78	3	70	76	0.91	0.9
M 52	59	57	55	81	84	3	74	80	0.92	0.9
M 56	64	62	59	86	92	3	80	86	0.91	0.9
M 64	72	70	67	96	100	3	90	93	0.93	0.9
M 72 X 6	80	78	75	107	112	3	97	100	0.93	0.9
M 80 X 6	87	85	82	117	122	3	104	108	0.93	0.9
M 90 X 6	97	95	91	132	136	3	113	117	0.92	0.9
M 100 X 6	106	104	100	148	153	4	122	127	0.92	0.9
M 110 x 6	115	113	109	162	167	4	131	136	0.93	0.9
M 120 x 6	124	122	118	178	183	4	140	145	0.93	0.9

Bolted connections with reduced shank, survey and installation

DIN 2510 Table 1. Assembling examples: bolts with hex. nuts - Einbauspiele: Schraubenbolzen mit Sechskantmuttern - Esempi d''assemblaggio: bullone con dado
Publication date:09/1974
Image	bolts	expansion sleeves	hex. nuts	Notes
	L	-	NF	centering through bolts, l1=clamping length+2c1, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Schraubenbolzen, l1=Klemmlänge+2c1, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite bulloni , l1 = lunghezza di assemblaggio+ 2 c1 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	L	E	NF	centering through bolts and exp. sleeves, l1=clamping length+2c1, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Schraubenbolzen und Dehnhülsen, l1=Klemmlänge+2c1, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite bulloni e boccole, l1 = lunghezza di assemblaggio+ 2 c1 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	K	-	NF	centering through nuts, l1=clamping length+2c1, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Sechskantmuttern, l1=Klemmlänge+2c1, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite bulloni , l1 = lunghezza di assemblaggio+ 2 c1 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	K	D	TF	centering through nuts and exp. sleeves, l1=clamping length+2c2, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Sechskantmuttern und Dehnhülsen, l1=Klemmlänge+2c2, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite dadi e boccole , l1 = lunghezza di assemblaggio+ 2 c2 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	Z -	-	NF	centering through bolts, l1=clamping length+2c3, grading of the screw length l1 from 5 mm to 5 mm; Zentrierung durch Schraubenbolzen, l1=Klemmlänge+2c3, Stufung der Schraubenlänge l1 von 5mm zu 5mm; centratura tramite bulloni , l1 = lunghezza di assemblaggio+ 2 c3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm.
	Z	E	NF	centering though bolts and exp. sleeves exp. sleeves, l1=clamping length+2c3, grading of the screw length l1 from 5 mm to 5 mm; Zentrierung durch Schraubenbolzen und Dehnhülsen, l1=Klemmlänge+2c3, Stufung der Schraubenlänge l1 von 5mm zu 5mm. centratura tramite bulloni e boccole , l1 = lunghezza di assemblaggio+ 2 c3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;

DIN 2510 Table 2
thread size d1	c1	c2	c3 min	d2	d3	d4	example l1/d1 1&3	example l1/d1 3&4	example l1/d1 5&6	t1
M 12	14	12	16	23	23	23	0.88	0.84	0.92	1.5
M 16	18	16	20	28	28	28	0.9	0.87	0.93	1.5
M 20	22.5	20.5	24	33	33	33	0.92	0.89	0.93	1.5
M 24	27	24	29	37	37	37	0.91	0.88	0.93	2
M 27	30	27	32	43	43	43	0.92	0.89	0.94	2
M 30	33.5	30.5	36	48	47	48	0.93	0.9	0.94	2
M 33	36.5	33.5	39	53	52	53	0.9	0.91	0.94	2
M 36	40	37	43	57	56	57	0.94	0.91	0.94	2
M 39	43	40	46	63	61	63	0.94	0.92	0.94	2
M 42	46.5	43.5	49	69	66	69	0.94	0.92	0.94	2
M 45	49.5	46.5	52	73	71	73	0.95	0.92	0.95	2
M 48	53	49	56	78	76	78	0.95	0.92	0.95	3
M 52	5	53	60	84	81	84	0.95	0.93	0.95	3
M 56	61.5	57.5	64	92	86	92	0.95	0.93	0.95	3
M 64	70	66	73	100	96	100	0.95	0.94	0.95	3
M 72 X 6	78	74	81	112	107	112	0.95	0.94	0.95	3
M 80 X 6	86	82	89	120	117	122	0.96	0.95	0.96	3
M 90 X 6	96	92	99	134	132	136	0.96	0.95	0.96	3
M 100 X 6	106	101	109	150	148	153	0.9	0.96	0.97	4
M 110 x 6	116	111	119	160	162	167	0.97	0.96	0.97	4
M 120 x 6	126	121	129	175	178	183	0.97	0.96	0.97	4

DIN 2510 Table 3. Assembling examples: bolts with cap nuts - Einbauspiele: Schraubenbolzen mit Kapselmuttern - Esempi 0.97d''assemblaggio: bulloni con tappi di cope153rtura
Image163	bolts	expansion sleeves	hex. nuts	Notes
173	KU	-	AF	centering through cap nuts, l1=clamping length+c4+c5, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Kapselmuttern, l1=Klemmlänge+c4+c5, Stufung der Schraubenlänge l1 von 1mm zu 1mm; centratura tramite dadi di copertura , l1 = lunghezza di assemblaggio+ c4+c5 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
183	KU	D	BF	centering through cap nuts and exp. sleeves, l1=clamping length+c6+c7, grading of the screw length l1 from 1 mm to 1 mm; Zentrierung durch Kapselmuttern und Dehnhülsen, l1=Klemmlänge+c6+c7, Stufung der Schraubenlänge l1 von 1mm zu 1mm centratura tramite dadie boccole, l1 = lunghezza di assemblaggio+ c6+c7 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	ZU	-	AF	centering through bolts, l1=clamping length+c4+c8, grading of the screw length l1 from 5 mm to 5 mm; Zentrierung durch Schraubenbolzen, l1=Klemmlänge+c4+c8, Stufung der Schraubenlänge l1 von 5mm zu 5mm; centratura tramite bulloni , l1 = lunghezza di assemblaggio+ c4+c8 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;
	ZU	E	AF	centering through bolts and exp. sleeves, l1=clamping length+c4+c8, grading of the screw length l1 from 5 mm to 5 mm Zentrierung durch Schraubenbolzen und Dehnhülsen, l1=Klemmlänge+c4+c8, Stufung der Schraubenlänge l1 von 5 mm zu 5 mm; centratura tramite bulloni e boccole , l1 = lunghezza di assemblaggio+ c4+c8 , gradazione delle lunghezze vite da 5 mm a 5 mm;

DIN 2510 Table 4
thread size d1	c4	c5	c6	c7	c8 min	d3	d4	example l1/d1 1&2	example l1/d1 3&4	t1
M 12	30	18	28	16	17	23	23	0.96	0.9	1.5
M 16	35	21	33	19	21	28	28	0.87	0.9	1.5
M 20	41	25	39	23	25	33	33	0.88	0.9	1.5
M 24	46	29	44	27	30	37	37	0.85	0.9	2
M 27	51	32	49	30	33	43	43	0.86	0.9	2
M 30	56	36	54	34	36	47	48	0.9	0.9	2
M 33	61	39	59	37	39	52	53	0.9	0.9	2
M 36	65	42	63	40	43	56	57	0.9	0.9	2
M 39	67	45	65	43	45	61	63	0.9	0.9	2
M 42	72	48	70	46	49	66	69	0.91	0.9	2
M 45	75	51	73	49	51	71	73	0.9	0.9	2
M 48	82	56	80	54	55	76	78	0.91	0.9	3
M 52	86	59	84	57	59	81	84	0.92	0.9	3
M 56	91	64	89	62	63	86	92	0.91	0.9	3
M 64	100	72	98	70	71	96	100	0.93	0.9	3
M 72 X 6	108	80	106	78	78	107	112	0.93	0.9	3
M 80 X 6	115	87	113	85	85	117	122	0.93	0.9	3
M 90 X 6	124	97	122	95	94	132	136	0.93	0.9	3
M 100 X 6	133	106	131	104	103	148	153	0.92	0.9	4
M 110 x 6	142	115	140	113	112	162	167	0.93	0.9	4
M 120 x 6	153	124	151	122	121	178	183	0.93	0.9	4

DIN 2510 Table 5. Assembling examples: studs with hex. nuts - Einbauspiele: Stiftschrauben mit Sechskantmuttern - Esempi d''assemblaggio: tiranti con dadi esagonali
Image	studs	expansion sleeves	hex. nuts	Notes
	GQ,HQ,GS or HS	-	NF	l1=clamping length +c1+t2 or +c1+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c1+t2 oder +c1+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c1+t2 o +c1+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	GQ,HQ,GS or HS	D	TF	l1=clamping length +c2+t2 or +c2+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c2+t2 oder +c2+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c2+t2 o +c2+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	GP,HP,GR or HR	-	NF	l1=clamping length +c9+t2 or +c9+t3 , grading of the screw length l1 from 5 mm to 5 mm; l1=Klemmlänge+c9+t2 oder +c9+t3, Stufung der Schraubenlänge l1 von 5 mm zu 5 mm; l1 = lunghezza di assemblaggio +c9+t2 o +c9+t3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;
	GP,HP,GR or HR	E	NF	l1=clamping length +c9+t2 or +c9+t3 , grading of the screw length l1 from 5 mm to 5 mm l1=Klemmlänge+c9+t2 oder +c9+t3, Stufung der Schraubenlänge l1 von 5 mm zu 5 mm; l1 = lunghezza di assemblaggio +c9+t2 o +c9+t3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;

DIN 2510 Table 6
thread size	c1	c2	c9 min	d2	d3	d4	t1	t2	t3	example l1/d1 1&2	example l1/d1 3&4
M 12	14	12	15	23	23	23	1.5	21	23	0.84	0.92
M 16	18	16	19	28	28	28	1.5	25.5	28	0.87	0.93
M 20	22.5	20.5	24	33	33	33	1.5	32.5	35	0.89	0.93
M 24	27	24	29	37	37	37	2	38.5	41	0.88	0.93
M 27	30	27	32	43	43	43	2	41	44	0.89	0.94
M 30	33.5	30.5	35	48	47	48	2	46.5	50	0.9	0.94
M 33	36.5	33.5	39	53	52	53	2	49	53	0.91	0.94
M 36	40	37	42	57	56	57	2	54	59	0.91	0.94
M 39	43	40	45	63	61	63	2	57	61	0.92	0.94
M 42	46.5	43.5	49	69	66	69	2	62.5	67	0.92	0.94
M 45	49.5	46.5	52	73	71	73	2	65	70	0.92	0.94
M 48	53	49	55	78	76	78	3	70	76	0.92	0.95
M 52	5	53	59	84	81	84	3	74	80	0.93	0.95
M 56	61.5	57.5	64	92	86	92	3	80	86	0.93	0.95
M 64	70	66	73	100	96	100	3	90	93	0.94	0.95
M 72 X 6	78	74	81	112	107	112	3	97	100	0.94	0.95
M 80 X 6	86	82	89	120	117	122	3	104	108	0.95	0.96
M 90 X 6	96	92	99	134	132	136	3	113	117	0.95	0.96
M 100 X 6	106	101	109	150	148	153	4	122	127	0.96	0.97
M 110 x 6	116	111	119	160	162	167	4	131	136	0.96	0.97
M 120 x 6	126	121	129	175	178	183	4	140	145	0.96	0.97

DIN 2510 Table 7. Assembling examples: bolts with cap nuts - Einbauspiele: Schraubenbolzen mit Kapselmuttern - Esempi d''assemblaggio: bulloni con tappi di copertura
Image	bolts	expansion sleeves	hex. nuts	Notes
	GQ,HQ,GS or HS	-	AF	l1=clamping length +c5+t2 or +c5+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c5+t2 oder +c5+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c5+t2 o +c5+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	GQ,HQ,GS or HS	D	BF	l1=clamping length +c7+t2 or +c7+t3 , grading of the screw length l1 from 1 mm to 1 mm; l1=Klemmlänge+c7+t2 oder +c7+t3, Stufung der Schraubenlänge l1 von 1mm zu 1mm; l1 = lunghezza di assemblaggio +c7+t2 o +c7+t3 , gradazione delle lunghezze vite l1 da 1 mm a 1 mm;
	GP,HP,GR or HR	-	AF	l1=clamping length +c10+t2 or +c10+t3 , grading of the screw length l1 from 5 mm to 5 mm; l1=Klemmlänge+c10+t2 oder +c10+t3, Stufung der Schraubenlänge l1 von 5 mm zu 5 mm; l1 = lunghezza di assemblaggio +c10+t2 o +c10+t3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;
	GP,HP,GR or HR	E	AF	l1=clamping length +c10+t2 or +c10+t3 , grading of the screw length l1 from 5 mm to 5 mm; l1=Klemmlänge+c10+t2 oder +c10+t3, Stufung der Schraubenlänge l1 von 5 mm zu 5 mm; l1 = lunghezza di assemblaggio +c10+t2 o +c10+t3 , gradazione delle lunghezze vite l1 da 5 mm a 5 mm;

DIN 2510 Table 8
thread size	c5	c7	c10 min	d3	d4	t1	t2	t3	example l1/d1 3&4	example l1/d1 5&6
M 12	18	16	14	23	23	1.5	21	23	0.96	0.9
M 16	21	1	18	28	28	1.5	25.5	28	0.87	0.9
M 20	25	23	22	33	33	1.5	25.5	35	0.88	0.9
M 24	29	27	27	37	37	2	38.5	41	0.85	0.9
M 27	32	30	30	43	43	2	41	44	0.96	0.9
M 30	36	34	33	47	48	2	46.5	50	0.9	0.9
M 33	39	37	36	52	53	2	49	53	0.9	0.9
M 36	42	40	39	56	57	2	54.5	59	0.9	0.9
M 39	45	43	42	61	63	2	57	61	0.9	0.9
M 42	48	46	45	66	69	2	62.5	67	0.91	0.9
M 45	51	49	48	71	73	2	65	70	0.9	0.9
M 48	56	54	51	76	78	3	70	76	0.91	0.9
M 52	59	57	55	81	84	3	74	80	0.92	0.9
M 56	64	62	59	86	92	3	80	86	0.91	0.9
M 64	72	70	67	96	100	3	90	93	0.93	0.9
M 72 X 6	80	78	75	107	112	3	97	100	0.93	0.9
M 80 X 6	87	85	82	117	122	3	104	108	0.93	0.9
M 90 X 6	97	95	91	132	136	3	113	117	0.92	0.9
M 100 X 6	106	104	100	148	153	4	122	127	0.92	0.9
M 110 x 6	115	113	109	162	167	4	131	136	0.93	0.9
M 120 x 6	124	122	118	178	183	4	140	145	0.93	0.9

Full list of Suppliers of Bolted connections with reduced shank, survey and installation

The Part 1 of the norm Din 2510 describes application and installation examples, studies on the measurement of the screw connections. \nBolted connections with reduced shank according to this standard are preferably used where the conservation of the bias and the durability of screw connections are to be largely ensured under varying of the mechanical and thermal loads.

Italy

BIMECCANICA SRL

Manufacturer of trapezial threaded rods

Italy

Bulloneria Villa Spa

Manufacturer and distributor of Studs, hexagon head screws, socket cap screws, washers and eye bolts

China

Haiyan Haiyu Fasteners Co.,Ltd

Manufacturer of threaded rods, studs

France

IBF

Manufacturer of threaded rods, anchor rods, tie bars and studs

Italy

ROVELLI UMBERTO E LORENZO

Manufacturer of studs and stud bolts

India

SUNIL INDUSTRIES

Manufacturer of stainless threaded rods, bolts, washers and nuts

Germany

WOLFF - Sonderschrauben Gmbh

Manufacturer of standard and special fasteners

Romania

Bendkopp Fasteners Import Export S.r.l.

Fasteners for: automobile, ironwork, furniture, producers of aluminum & PVC carpentry, agricultural machinery, mechanical engineering, fine mechanics, wood, metallic structures, food, energetic, chemical, petrochemical, gas, nuclear, nautical.

South Korea

S&W Corporation

World class manufacturer of bespoke hot forged/heat treated Industrial bolts & nuts and Marine engine components.

Italy

AB&S-AVVITO S.r.l.

Supplier of nuts, bolts and special drawing parts, both forged and turned.

UNI EN ISO 9001:2015 certified company.

Bonner Studs Ltd

Manufacturer of studs and allthreads, sizes from 4mm up to 36mm (3/16' TO 1 ½') diameter and from 15MM up to 1 meter in length.

Italy

CANALI SRL

Manufacturer of threaded rods, full thread studs, u-bolts

Italy

COLOMBO MAGNO Srl

Manufacturer of studs, eyebolts and special products

Afghanistan

Es Metal Ticaret

Manufacturer of threaded rods and stud bolts

Italy

FERRUCCIO GIRARDELLO SRL

Manufacturer of double-end studs, turned special fasteners in stainless steel and exotic alloys.

Italy

GEL di Giussani E. & L. s.n.c.

Manufacturer of hooks, eyebolts, U-bolts, studs, log bolts, foundation clamps, rods, pins, tie-rods, threaded bars and special chamfered-end bars

Afghanistan

GUVEN BAGLANTI ELEMANLARI ILETISIM

Manufacturer of threaded rods, foundation bolts and studs

Germany

Hans-Peter Scharwath e. K. Inhaber Oliver Münch

Scharwath Metallwaren is specialized in all kinds of fasteners in steel and stainless steel.

We are a manufacturer of U-bolts, foundation bolts, welding studs, double end studs, anchor screws, threaded parts, threaded rods, hose clamps, bent wire parts.

We manufacture according DIN norms and following customer-specific drawings. Small to large batch sizes, in all common grades and surfaces. Fast response times and delivery for the desired quality.

Germany

Heinrich Jungeblodt GmbH & Co. KG

Manufacturer of hot forged fasteners, stud bolts with reduced shank DIN 2510, DIN 2509

Hydrobolt Group Holdings Ltd

Manufacturing of special fasteners and machined (inconel, monel, super duplex, hastelloy, titanium, nimonic, B16 and Durehete)

Manufacturing, stocking and distributing petro-chemical grade studbolt assemblies and fasteners.

Germany

ITH-GmbH & Co. KG

Manufacturer of Tools for tightening and loosening large bolts. The production range includes round nuts and stud bolts

London Screw Company

Manufacturer of screws, threaded studs and threaded rods in metric and inch sizes

Brazil

MAX DEL LTDA

Producer of rivets, studs, bolts and special parts for automotive

Italy

OET SRL

Hot forging of fasteners, in special steels, mainly for “Oil & Gas” sector.

Our product range includes:

• hexagon head screws, socket cap screws and 12-point screws.

• hexagon nuts and 12-point nuts

• plugs

• special parts following customer requirement

Italy

OFFICINA BONACINA S.R.L.

Producers of studs, dowelscrews, u-bolts, tie rods turned and milled according to customers drawing.

Anchors for galleries forwork

Italy

Piscetta Officina Meccanica Srl

Producer of threaded rods and studs

Afghanistan

PJSC Druzhkovka Hardware Plant

Manufacturer of hexagon bolts and screws (from M6 up to M42), hexagon nuts (from M6 up to M42), and solid rivets (Ø6 – Ø30). GOST Norms

India

Right-Fit Fastners Pvt Ltd

Manufacturer of special screws and studs from M4 to M50 (4.6, 6.8, 8.8, 10.9, 12.9, B7, etc.)

Germany

RSG Rohrbau Service GmbH

Distributor of fittings, flanges, pipes, gaskets and stud bolts

Iran

Sahand Foulad

Manufacturer of stud bolts and fasteners both standard and special. Oil&gas and railway sector

Germany

Schuster GmbH

Manufacturer of double end stud, stud bolts, both metric and inch sizes

China

Shaoxing Yongan High Pressure Fastener Co.ltd

Manufacturer of high stength fasteners and fasteners for petrochemical sector (ASTM A193/A320/A325)

ASTM A193 Grade B7, B7M, B8 (304 SS), B8M (316 SS). B8T, B8MX, B8TX, B16 stud bolt. A320 L7, L7M, A453 660A, 660B, 660C, 660D, A325 & A490 steel structure bolt set and assembling A194 and A563 series heavy hex nut

Germany

Qualities: 8.8, 10.9, 12.9, G5&G8. Pieces manufacture by cold forging, diameters from 5mm to 22mm (¼” to ?”).

Metallographic Laboratory in our facilities.

ISO 9001 Certificate.

Venezuela

UNUPARTS CA

Manufacturer of fasteners for the automotive and industrial sector

Czech Republic

Valenta ZT s.r.o.

Producer of threaded rods, trapezoidal rods, studs, timber connectors

Suppliers of Bolted connections with reduced shank, survey and installation

Technical data

Standard DIN 2510-1

Details