| Antriebs-Typ: |
Fasteners |
| Gewünschte Lieferzeit: |
Beliebig |
Project A
Muttern PN EN ISO 4032 mat: X6CrNiTi18-10:
M10 – 20 St.
M12 - 850 St.
M16 - 760 St.
M30 - 20 St.
Scheiben PN-77/M82008 mat: 65G+Fe/Zn9
po 10 - 100 St.
po 12 - 890 St.
po 16 - 760 St.
po 30 - 10 St.
M10x40 DIN 939 mat: 1.4404 - 20 St.
Sechskantschrauben PN-EN 1515-1 mat: X6CrNiTi18-10
M10x22 - 40 St.
M10x30 - 20 St.
M12x40 - 70 St.
M12x70 - 40 St.
M12x90 - 410 St.
M16x100 - 40 St.
M16x85 - 280 St.
M16x90 - 70 St.
M30x320 - 8 St. (type Z for key)
Schrauben PN EN ISO 4014 mat: X6CrNiTi18-10:
M10x22 - 40 St.
M12x130 - 20 St.
M12x45 - 40 St.
Projekt B:
Muttern PN EN ISO 4032 mat: X6CrNiTi18-10:
M10 - 20St.
M12 - 850 St.
M16 - 920 St.
M30 - 18 St.
Scheiben PN-77/M82008 mat: 65G+Fe/Zn9
po 10 - 60 St.
po 12 - 890 St.
po 16 - 920 St.
po 30 - 10 St.
M10x40 DIN 939 mat: 1.4404 wg rys 210-M-002-74 - 20 St.
Schrauben PN-EN 1515-1 mat: X6CrNiTi18-10
M10x30 - 20 St.
M12x40 - 70 St.
M12x70 - 40 St.
M12x90 - 390 St.
M16x100 - 100 St.
M16x85 - 280 St.
M16x90 - 40 St.
M30x320 - 8 St. (typ Z)
Schrauben PN EN ISO 4014 mat: X6CrNiTi18-10:
M10x22 - 70 St.
M12x130 - 20 St.
M12x45 - 40 St.
A 16x40 DIN 7 mat. 1.4404 -24 St.
prismatic groove A20x50 PN 85005 mat: 1.4404 - 16 St.
Requirements:
Pressure and / or pressure transmitting elements and welded components and support plates are required for the certificate Min 3.1 according to EN 10204. Approvals must comply with point 2.0 in accordance with EN 10204
ASME materials must be approved with the results of tests and tests complying with ASME II Part A, 2015.
Fasteners in galvanized execution. Unless otherwise noted, purchase grade 8.8 bolts and 8 grade nuts.
