Project A Dadi PN EN ISO 4032 mat: X6CrNiTi18-10: M10 – 20 pz. M12 - 850 pz. M16 - 760 pz. M30 - 20 pz. Rondelle PN-77/M82008 mat: 65G+Fe/Zn9 po 10 - 100 pz. po 12 - 890 pz. po 16 - 760 pz. po 30 - 10 pz. M10x40 DIN 939 mat: 1.4404 - 20 pz. Viti a testa esagonale PN-EN 1515-1 mat: X6CrNiTi18-10 M10x22 - 40 pz. M10x30 - 20 pz. M12x40 - 70 pz. M12x70 - 40 pz. M12x90 - 410 pz. M16x100 - 40 pz. M16x85 - 280 pz. M16x90 - 70 pz. M30x320 - 8 pz. (type Z for key) Viti PN EN ISO 4014 mat: X6CrNiTi18-10: M10x22 - 40 pz. M12x130 - 20 pz. M12x45 - 40 pz. Projekt B: Dadi PN EN ISO 4032 mat: X6CrNiTi18-10: M10 - 20pz. M12 - 850 pz. M16 - 920 pz. M30 - 18 pz. Rondelle PN-77/M82008 mat: 65G+Fe/Zn9 po 10 - 60 pz. po 12 - 890 pz. po 16 - 920 pz. po 30 - 10 pz. M10x40 DIN 939 mat: 1.4404 wg rys 210-M-002-74 - 20 pz. Viti PN-EN 1515-1 mat: X6CrNiTi18-10 M10x30 - 20 pz. M12x40 - 70 pz. M12x70 - 40 pz. M12x90 - 390 pz. M16x100 - 100 pz. M16x85 - 280 pz. M16x90 - 40 pz. M30x320 - 8 pz. (typ Z) Viti PN EN ISO 4014 mat: X6CrNiTi18-10: M10x22 - 70 pz. M12x130 - 20 pz. M12x45 - 40 pz. A 16x40 DIN 7 mat. 1.4404 -24 pz. prismatic groove A20x50 PN 85005 mat: 1.4404 - 16 pz. Requirements: Pressure and / or pressure transmitting elements and welded components and support plates are required for the certificate Min 3.1 according to EN 10204. Approvals must comply with point 2.0 in accordance with EN 10204 ASME materials must be approved with the results of tests and tests complying with ASME II Part A, 2015. Fasteners in galvanized execution. Unless otherwise noted, purchase grade 8.8 bolts and 8 grade nuts.