1) Turnbuckle size 15.9mm x 229mm - refer to the table on the attached drawing - approx quantity 300 No 2) Turnbuckle size 9.53mm x 152mm - refer to the table on the attached drawing - approx quantity 300 No - Must meet the performance requirements of ASTM F-1145 for material properties - Must meet the performance requirements of ASME B30.26 for ductility, design factor, proof load and temperature requirements - Must have a hot dipped galvanised finish Wire Rope thimbles 3) Closed thimble 11-13mm - refer to the table on the attached drawing - approx quantity 600 No 4) Closed thimble 6-7mm - refer to the table on the attached drawing - approx quantity 300 No 5) Open thimble - 6-7mm - refer to the table on the attached drawing - approx quantity 300 No - Must have a hot dipped galvanised finish - Must be manufactured from steel S460 conforming to EN 10025 - Must meet the performance requirements of EN13411-1:2002 Forged Wire Rope Clamps 6) Forged Wire Rope Clamp 11-13mm - refer to the table on the attached drawing - approx quantity 800 No 7) Forged Wire Rope Clamp 6 -7mm - refer to the table on the attached drawing - approx quantity 400 No Specification - Must have a hot dipped galvanised finish - Must comply with material class 6.8 in accordance with EN ISO 898-1 - Must meet or exceed the performance requirements of EN13411 1:2003 First Grip Wire Rope Clamps 8) First Grip Wire Rope Clamp 11-13mm - refer to the table on the attached drawing - approx quantity 800 No - Must have a hot dipped galvanised finish - Must comply with material class 6.8 in accordance with EN ISO 898-1 - Must meet or exceed the performance requirements of EN13411 1:2002