Project A NUTS PN EN ISO 4032 mat: X6CrNiTi18-10: M10 - 20pcs.=PCS M12 - 850 pcs. M16 - 760 pcs. M30 - 20 pcs. WASHERS PN-77/M82008 mat: 65G+Fe/Zn9 po 10 - 100 pcs. po 12 - 890 pcs. po 16 - 760 pcs. po 30 - 10 pcs. M10x40 DIN 939 mat: 1.4404 - 20 pcs. HEX BOLT PN-EN 1515-1 mat: X6CrNiTi18-10 M10x22 - 40 pcs. M10x30 - 20 pcs. M12x40 - 70 pcs. M12x70 - 40 pcs. M12x90 - 410 pcs. M16x100 - 40 pcs. M16x85 - 280 pcs. M16x90 - 70 pcs. M30x320 - 8 pcs. (type Z for key) Bolts PN EN ISO 4014 mat: X6CrNiTi18-10: M10x22 - 40 pcs. M12x130 - 20 pcs. M12x45 - 40 pcs. Projekt B: Nuts PN EN ISO 4032 mat: X6CrNiTi18-10: M10 - 20pcs. M12 - 850 pcs. M16 - 920 pcs. M30 - 18 pcs. Washers PN-77/M82008 mat: 65G+Fe/Zn9 po 10 - 60 pcs. po 12 - 890 pcs. po 16 - 920 pcs. po 30 - 10 pcs. M10x40 DIN 939 mat: 1.4404 wg rys 210-M-002-74 - 20 pcs. Bolts PN-EN 1515-1 mat: X6CrNiTi18-10 M10x30 - 20 pcs. M12x40 - 70 pcs. M12x70 - 40 pcs. M12x90 - 390 pcs. M16x100 - 100 pcs. M16x85 - 280 pcs. M16x90 - 40 pcs. M30x320 - 8 pcs. (typ Z) Bolts PN EN ISO 4014 mat: X6CrNiTi18-10: M10x22 - 70 pcs. M12x130 - 20 pcs. M12x45 - 40 pcs. A 16x40 DIN 7 mat. 1.4404 -24 pcs. prismatic groove A20x50 PN 85005 mat: 1.4404 - 16 pcs. Requirements: Pressure and / or pressure transmitting elements and welded components and support plates are required for the certificate Min 3.1 according to EN 10204. Approvals must comply with point 2.0 in accordance with EN 10204 ASME materials must be approved with the results of tests and tests complying with ASME II Part A, 2015. Fasteners in galvanized execution. Unless otherwise noted, purchase grade 8.8 bolts and 8 grade nuts.